- 1 VPN (Virtual Private Network) connection
- 2 VPNSec
- 3 OpenVPN for Linux
- 4 OpenVPN for macOS
- 5 SSH SOCKS-Proxy to access journals (linux)
VPN (Virtual Private Network) connection
C&CZ also manages a VPN server, which makes it possible for all users to gain secure access to the network with their Science username and password.
The computer at home (or anywhere on the Internet) becomes part of the campus network. In this way users can get access to services that are normally only accessible from computers on campus. The most common of such services are connecting to disk shares or to special servers.
For the use of the University library one does not need VPN, because the library has a proxy website, that can be used from anywhere on the Internet after logging in with your RU-account and RU-password.
- VPN-server/gateway: vpnsec.science.ru.nl, based on IPsec.
VPNsec setup Windows 10
- Windows: Just add a *new* VPN with server vpnsec.science.ru.nl, that's all. Detailed instructions:
From Windows Settings, take the following route:
- Networks and Internet
- Add a VPN connection
- Fill in
|VPN provider||Windows (built-in)||default choice|
|Connection name||Science-VPNsec||choose something|
|Server name or address||vpnsec.science.ru.nl||provide as stated|
|VPN type||Automatic||default choice|
|Type of sign-in info||User name and password||default choice|
|User name (optional)||Science account||optional|
|Password (optional)||Science password||optional|
VPNsec setup Windows 7/8
- Windows: Just add a *new* VPN with server vpnsec.science.ru.nl, that's all. Detailed instructions are below.
From the windows Control panel, take the following route:
- Network and Internet
- Network and Sharing Center
- Setup a new connection or network
- Connect to a workspace -> Next
- Use my Internet connection (VPN)
- Fill in the Internet address: vpnsec.science.ru.nl
- and connection name, for example: Science VPNsec
- You'll be prompted for your Science username and password.
VPNsec setup macOS
- open "System Preferences"
- open "Network" preferences, after which you get the dialog shown in Picture 1 below.
Then execute the following steps:
- click on the "+" in left bottom to add a new network configuration
In the popup window fill in the following info:
press the "Create" button. Note: you are free to choose a string value for the "Service Name". Probably you can best name it "VPNsec".
- Select the new "VPN (IKE2) configuration on the left column (see picture 1 above)
- Fill in hostname of VPN on the form on the right side (see picture 1 above)
- Press the "Authentication Settings.." button and fill in their your science credentials. (see picture 1 above)
- Press the "Apply" button (see picture 1 above)
VPNsec setup iOS
- iOS (iPhone/iPad):
Deleting the old VPN profile via the config app following the routine above for macOS works, users have let us know.
Alternative: Download and install VPNsec-iOS.mobileconfig to your iPhone/iPad. Tested on iPad with iOS 9, according to documentation iOS 8 should work too, but is yet untested.
VPNsec setup Android
- Android: Install the strongSwan app with "IKEv2 EAP (Username/Password)". NB: some special characters in the password should be escaped using a "\".
VPNsec setup Linux
- Linux: VPNsec Linux installation and configuration
- Ubuntu 16.04: There is a known bug people are trying to fix, see msg4923789. A work around currently exists, requiring some manual configuration. See: VPNsec Linux installation and configuration. Or use the OpenVPN service.
OpenVPN for Linux
For e.g. Linux users that have trouble getting VPNsec working on their systems, C&CZ provides an OpenVPN service.
Setting up OpenVPN on Linux
Make sure you have the openvpn package installed. For Debian based distributions (like Ubuntu), run:
sudo apt-get install openvpn
Next, download the openvpn configuration file:
Starting OpenVPN on Linux
Startup the OpenVPN tunnel as follows:
sudo openvpn openvpn-ca-science.ovpn
You'll be asked for your science login name and password. Hit Control+C to terminate the OpenVPN connection.
All traffic through OpenVPN
Use OpenVPN's --redirect-gateway autolocal option (or put it in the config file as redirect-gateway autolocal)
OpenVPN for macOS
This starts with the choice of OpenVPN client software: The OpenVPN protocol is not one that is built into macOS. Therefore a client program is required that can handle capturing the traffic you wish to send through the OpenVPN tunnel, and encrypting it and passing it to the OpenVPN server. And of course, the reverse, to decrypt the return traffic. See OpenVPN.net for several options.
Next, download the openvpn configuration file:
SSH SOCKS-Proxy to access journals (linux)
There is a convenient alternative to VPN or the UB proxy website described above to access online journals from anywhere. With SSH one can start a so called SOCKS Proxy-server, which can be used by web-browsers.
- Login to your Science account with ssh:
ssh -D 8942 lilo.science.ru.nl # (or any other login-server) (Enter password if required)
If your Science username (e.g. "peter") is different on your local username use:
ssh -D 8942 firstname.lastname@example.org
The -D flag starts "dynamic" application-level portforwarding. The port number (here 8942) can be any number above 1024 and below 65536. If a port is already in use by another process try a different number.
- Tell the web browser to use the server. In Firefox:
* Edit - Preferences - Advanced - Settings * Select "Manual proxy configuration" * SOCKS Host: localhost Port: 8942 * Select SOCKS v5 * OK
Chromium and Google Chrome can be called from the command line with the proxyserver option:
If you now go to a journal website i.e., J. Chem. Phys., you should see "Your access is provided by: Universiteitsbibliotheek" and you should have the same access as from within the Radboud University domain.
Run ssh in the background
With these flags:
ssh -f -N -D port
ssh will run in the background (-f) and only setup the proxy server but not actually logon (-N).
The "netstat" command may be used to troubleshoot problems:
will show all active and non-active tcp sockets. In the above example you should see something like:
MYPC:/home/peter $ netstat -at Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:smtp *:* LISTEN tcp 0 0 localhost:8942 *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 peter.home:36953 postvak.science.r:imaps ESTABLISHED tcp 0 0 peter.home:36808 lilo3.science.ru.nl:ssh ESTABLISHED tcp 0 0 localhost:smtp *:* LISTEN tcp 0 0 localhost:8942 *:* LISTEN