Difference between revisions of "Peage"

From Cncz
Jump to: navigation, search
([Handmatige installatie][Manual installation])
Line 5: Line 5:
 
== [Algemeen][General] ==
 
== [Algemeen][General] ==
 
[nl]
 
[nl]
Péage is het print/scan/copy systeem van de Radboud Universiteit voor medewerkers en studenten. De Library of Science beschikt over [http://www.ru.nl/facilitairbedrijf/printen/gastenpas/ gastenpassen]. Algemene informatie is te vinden op de [http://www.ru.nl/peage Péage website].
+
Péage is het print/scan/copy systeem van de Radboud Universiteit voor medewerkers en studenten. Per maart 2019 zijn de oude Konica-Minolta MFP's en de bijbehorende software vervangen. De nieuwe server heet "print.hosting.ru.nl", de nieuwe printqueue "FollowMe". De Library of Science beschikt over [http://www.ru.nl/facilitairbedrijf/printen/gastenpas/ gastenpassen]. Algemene informatie is te vinden op de [http://www.ru.nl/peage Péage website].
  
 
Het [[Printbudget|C&CZ print en budget systeem]] wordt nog maar voor [http://wiki.science.ru.nl/cncz/Printers_en_printen#.5BC.26CZ_printbudget_printers.5D.5BC.26CZ_printbudget_printers.5D een paar printers] (poster en 3D) gebruikt.
 
Het [[Printbudget|C&CZ print en budget systeem]] wordt nog maar voor [http://wiki.science.ru.nl/cncz/Printers_en_printen#.5BC.26CZ_printbudget_printers.5D.5BC.26CZ_printbudget_printers.5D een paar printers] (poster en 3D) gebruikt.
Line 12: Line 12:
 
[/nl]
 
[/nl]
 
[en]
 
[en]
Péage is the print/scan/copy system of Radboud University for staff and students. The Library of Science has [http://www.ru.nl/facilitairbedrijf/printen/gastenpas/ passes for guests]. General information can be found on the [http://www.ru.nl/fb/english/print/printing-peage-0/ Péage website].
+
Péage is the print/scan/copy system of Radboud University for staff and students. As of March 2019, the old Konica Minolta MFPs and the corresponding software are replaced. The Library of Science has [http://www.ru.nl/facilitairbedrijf/printen/gastenpas/ passes for guests]. General information can be found on the [http://www.ru.nl/fb/english/print/printing-peage-0/ Péage website].
  
 
The [[Printbudget|C&CZ printbudget system]] is only used for [https://wiki.science.ru.nl/cncz/Printers_en_printen#.5BC.26CZ_printbudget_printers.5D.5BC.26CZ_printbudget_printers.5D a few printers] (poster and 3D).
 
The [[Printbudget|C&CZ printbudget system]] is only used for [https://wiki.science.ru.nl/cncz/Printers_en_printen#.5BC.26CZ_printbudget_printers.5D.5BC.26CZ_printbudget_printers.5D a few printers] (poster and 3D).
Line 29: Line 29:
 
     Nummer      Kamer Naam                                    Afdeling                              Email  
 
     Nummer      Kamer Naam                                    Afdeling                              Email  
 
     52246  HG02.047 Ir. J.J. Zijlstra, (Jan-Jetze)          Facbureau NW      J.Zijlstra@science.ru.nl  
 
     52246  HG02.047 Ir. J.J. Zijlstra, (Jan-Jetze)          Facbureau NW      J.Zijlstra@science.ru.nl  
* [nl]Kan geen A3 printen op een Mac: gebruik de [https://www.konicaminolta.eu/en/business-solutions/products/office/discontinued-products/multifunctional-printers/colour/bizhub-c754/downloads.html KM-driver] in plaats van de Generic PS-driver.[/nl][en]Can't print A3 on a Mac: Use the [https://www.konicaminolta.eu/en/business-solutions/products/office/discontinued-products/multifunctional-printers/colour/bizhub-c754/downloads.html KM driver] instead of the Generic PS driver.[/en]
 
* [De oude PIN-codes voor een MFP (voor gratis kopiëren en scannen) werken niet meer][The old PIN codes (for copying and scanning without charge) do not work anymore]: [U moet inloggen met u/s/e/f-nummer op de MFP, daarna kunt u printen, kopiëren en scannen, alleen scannen is nog gratis][You need to login with u/s/e/f-number on the MFP, then you can print, copy or scan, only scanning is still free of charge].
 
* Printer offline: [Kies \\payprint01 of \\payprint02 i.p.v. \\payprint03][Choose \\payprint01 or \\payprint02 instead of \\payprint03]
 
 
* Remote Downlevel Document: [Wanneer vanaf Linux geprint wordt, geeft de MFP niet de bestandsnaam weer, maar "Remote Downlevel Document".][When printing from Linux, the MFP shows "Remote Downlevel Document" instead of the name of the printed file.]
 
* Remote Downlevel Document: [Wanneer vanaf Linux geprint wordt, geeft de MFP niet de bestandsnaam weer, maar "Remote Downlevel Document".][When printing from Linux, the MFP shows "Remote Downlevel Document" instead of the name of the printed file.]
* [Evince print in A3 formaat. Verwijder bestand][Evince print in A3 formaat. Remove file] <strong>~/.config/evince/print-settings</strong>.
+
* [Evince print in A3 formaat. Verwijder het bestand][Evince print in A3 format. Remove the file] <strong>~/.config/evince/print-settings</strong>.
* <strong>lpq</strong> [probleem][problem]. Update default printer. Edit [bestand][file] <strong>~/.lpoptions</strong> of <strong>~/.cups/lpoptions</strong>.
+
* <strong>lpq</strong> [probleem][problem]. Update default printer. Edit [het bestand][the file] <strong>~/.lpoptions</strong> [of|or] <strong>~/.cups/lpoptions</strong>.
 
* [In de Linux Document Viewer moet je twee keer printen voor eenmaal output.][In the Linux Document Viewer you need to print twice to get one output.]
 
* [In de Linux Document Viewer moet je twee keer printen voor eenmaal output.][In the Linux Document Viewer you need to print twice to get one output.]
* [Het is verstandig om printers welke niet meer in het C&amp;CZ printsysteem voorkomen van uw computer te verwijderen][Please remove printers that are no longer part of the C&amp;CZ print system from your computer].
+
* [Het is verstandig om printers welke niet meer in het printsysteem voorkomen van uw computer te verwijderen][Please remove printers that are no longer part of the print system from your computer].
* [<code>cups-2.2.7</code> en <code>smbclient-4.8.1</code> hebben een API discrepantie waardoor printen niet werkt op linux (gezien op Arch Linux). Een oplossing is om [https://twitter.com/mrngm/status/993492483786117121 <code>/usr/lib/cups/backend/smb</code> te patchen] (of <code>smbclient</code> up te daten).][<code>cups-2.2.7</code> and <code>smbclient-4.8.1</code> conflict in their command line API which breaks printing on linux (encountered on Arch Linux). A solution is to [https://twitter.com/mrngm/status/993492483786117121 patch <code>/usr/lib/cups/backend/smb</code>] (or to update <code>smbclient</code>).]
+
* [<code>cups-2.2.7</code> en <code>smbclient-4.8.1</code> hebben een API discrepantie waardoor printen niet werkt op Linux (gezien op Arch Linux). Een oplossing is om [https://twitter.com/mrngm/status/993492483786117121 <code>/usr/lib/cups/backend/smb</code> te patchen] (of <code>smbclient</code> te updaten).][<code>cups-2.2.7</code> and <code>smbclient-4.8.1</code> conflict in their command-line API which breaks printing on Linux (seen on Arch Linux). A solution is to [https://twitter.com/mrngm/status/993492483786117121 patch <code>/usr/lib/cups/backend/smb</code>] (or to update <code>smbclient</code>).]
 
 
[ ][ ]
 
  
 
== [Printen met Péage][Printing with Péage] ==
 
== [Printen met Péage][Printing with Péage] ==
Line 47: Line 42:
 
=== [Onderscheid gebruikers][User groups] ===
 
=== [Onderscheid gebruikers][User groups] ===
 
[nl]
 
[nl]
Péage kent op dit moment drie groepen gebruikers die elk van een andere printserver en wachtrij gebruik zouden moeten maken:
+
Péage kent op dit moment 1 printserver en 1 wachtrij voor FollowMe printen:
 
[/nl]
 
[/nl]
 
[en]
 
[en]
Péage recognizes three user groups, each should be using a dedicated printserver and printqueue:
+
Péage has 1 printserver and 1 printqueue for FollowMe printing:
 
[/en]
 
[/en]
 
<!--
 
<!--
 
{| class="wikitable"
 
{| class="wikitable"
! style="padding-left: 1em; padding-right: 1em;" |
 
 
! style="padding-left: 1em; padding-right: 1em;" | [printer server][printserver]
 
! style="padding-left: 1em; padding-right: 1em;" | [printer server][printserver]
 
! style="padding-left: 1em; padding-right: 1em;" | [print wachtrij][printqueue]
 
! style="padding-left: 1em; padding-right: 1em;" | [print wachtrij][printqueue]
Line 60: Line 54:
 
! style="padding-left: 1em; padding-right: 1em;" | URI - IPP style
 
! style="padding-left: 1em; padding-right: 1em;" | URI - IPP style
 
|-
 
|-
| style="padding-left: 1em; padding-right: 1em;" | [studenten][students]
+
| style="padding-left: 1em; padding-right: 1em;" | <b>print.hosting.ru.nl</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>payprint01.ru.nl</b>
+
| style="padding-left: 1em; padding-right: 1em;" | <b>FollowMe</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>RU-Print</b>
+
| style="padding-left: 1em; padding-right: 1em;" | <b>\\print.hosting.ru.nl\FollowMe</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>\\payprint01.ru.nl\RU-Print</b>
+
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://print.hosting.ru.nl/FollowMe</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://payprint03.ru.nl/RU-Print</b>
 
 
|-
 
|-
| style="padding-left: 1em; padding-right: 1em;" | [medewerkers RU services][RU services employees]
 
| style="padding-left: 1em; padding-right: 1em;" | <b>payprint02.ru.nl</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>RU-Print02</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>\\payprint02.ru.nl\RU-Print02</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://payprint02.ru.nl/RU-Print02</b>
 
|-
 
| style="padding-left: 1em; padding-right: 1em;" | [medewerkers Faculteiten][Faculty employees]
 
| style="padding-left: 1em; padding-right: 1em;" | <b>payprint03.ru.nl</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>RU-Print03</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>\\payprint03.ru.nl\RU-Print03</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://payprint03.ru.nl/RU-Print03</b>
 
 
|}
 
|}
 
-->
 
-->
 
{| class="wikitable"
 
{| class="wikitable"
! style="padding: 2px 1em;" |
 
 
! style="padding: 2px 1em;" | [printer server][printserver]
 
! style="padding: 2px 1em;" | [printer server][printserver]
 
! style="padding: 2px 1em;" | [print wachtrij][printqueue]
 
! style="padding: 2px 1em;" | [print wachtrij][printqueue]
Line 86: Line 67:
 
! style="padding: 2px 1em;" | URI - IPP style
 
! style="padding: 2px 1em;" | URI - IPP style
 
|-
 
|-
| style="padding: 2px 1em;" | [studenten][students]
+
| style="padding: 2px 1em;" | <b>print.hosting.ru.nl</b>
| style="padding: 2px 1em;" | <b>payprint01.ru.nl</b>
+
| style="padding: 2px 1em;" | <b>FollowMe</b>
| style="padding: 2px 1em;" | <b>RU-Print</b>
+
| style="padding: 2px 1em;" | <b>\\print.hosting.ru.nl\FollowMe</b>
| style="padding: 2px 1em;" | <b>\\payprint01.ru.nl\RU-Print</b>
+
| style="padding: 2px 1em;" | <b>smb://print.hosting.ru.nl/FolowMe</b>
| style="padding: 2px 1em;" | <b>smb://payprint01.ru.nl/RU-Print</b>
 
|-
 
| style="padding: 2px 1em;" | [medewerkers RU services][RU services employees]
 
| style="padding: 2px 1em;" | <b>payprint02.ru.nl</b>
 
| style="padding: 2px 1em;" | <b>RU-Print02</b>
 
| style="padding: 2px 1em;" | <b>\\payprint02.ru.nl\RU-Print02</b>
 
| style="padding: 2px 1em;" | <b>smb://payprint02.ru.nl/RU-Print02</b>
 
 
|-
 
|-
| style="padding: 2px 1em;" | [medewerkers Faculteiten][Faculty employees]
 
| style="padding: 2px 1em;" | <b>payprint03.ru.nl</b>
 
| style="padding: 2px 1em;" | <b>RU-Print03</b>
 
| style="padding: 2px 1em;" | <b>\\payprint03.ru.nl\RU-Print03</b>
 
| style="padding: 2px 1em;" | <b>smb://payprint03.ru.nl/RU-Print03</b>
 
 
|}
 
|}
 
[nl]
 
[nl]
Line 117: Line 86:
 
! style="padding-left: 1em; padding-right: 1em;" | URI - IPP style
 
! style="padding-left: 1em; padding-right: 1em;" | URI - IPP style
 
|-
 
|-
| style="padding-left: 1em; padding-right: 1em;" | [studenten][students]
+
| style="padding-left: 1em; padding-right: 1em;" | <b>print.hosting.ru.nl</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>payprint01.ru.nl</b>
+
| style="padding-left: 1em; padding-right: 1em;" | <b>KMxxxx</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>KM-PRxxxx</b>
+
| style="padding-left: 1em; padding-right: 1em;" | <b>\\print.hosting.ru.nl\KMxxxx</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>\\payprint01.ru.nl\KM-PRxxxx</b>
+
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://print.hosting.ru.nl/KMxxxx</b>
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://payprint03.ru.nl/KM-PRxxxx</b>
 
|-
 
| style="padding-left: 1em; padding-right: 1em;" | [medewerkers RU services][RU services employees]
 
| style="padding-left: 1em; padding-right: 1em;" | <b>payprint02.ru.nl</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>KM-PRxxxx</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>\\payprint02.ru.nl\KM-PRxxxx</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://payprint02.ru.nl/KM-PRxxxx</b>
 
 
|-
 
|-
| style="padding-left: 1em; padding-right: 1em;" | [medewerkers Faculteiten][Faculty employees]
 
| style="padding-left: 1em; padding-right: 1em;" | <b>payprint03.ru.nl</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>KM-PRxxxx</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>\\payprint03.ru.nl\KM-PRxxxx</b>
 
| style="padding-left: 1em; padding-right: 1em;" | <b>smb://payprint03.ru.nl/KM-PRxxxx</b>
 
 
|}
 
|}
<!--
 
<table border="0">
 
  <tr><td width="50%"></td>
 
      <td width="25%">print server</td>
 
      <td width="25%">print queue</td>
 
      <td>UNC - Windows style</td>
 
      <td>URI - IPP style</td>
 
  </tr>
 
  <tr><td>Studenten</td>
 
      <td><b>payprint01.ru.nl</b></td>
 
      <td><b>RU-Print</b></td>
 
      <td><b>\\payprint01.ru.nl\RU-Print</b></td>
 
      <td><b>smb://payprint01.ru.nl/RU-Print</b></td>
 
  </tr>
 
  <tr><td>Medewerkers RU services</td>
 
      <td><b>payprint02.ru.nl</b></td>
 
      <td><b>RU-Print02</b></td>
 
      <td><b>\\payprint02.ru.nl\RU-Print02</b></td>
 
      <td><b>smb://payprint02.ru.nl/RU-Print02</b></td>
 
  </tr>
 
  <tr><td>Medewerkers Faculteiten</td>
 
      <td><b>payprint03.ru.nl</b></td>
 
      <td><b>RU-Print03</b></td>
 
      <td><b>\\payprint03.ru.nl\RU-Print03</b></td>
 
      <td><b>smb://payprint03.ru.nl/RU-Print03</b></td>
 
  </tr>
 
</table>
 
-->
 
  
 
+
=== [Peage portal: Printen met Péage op een willekeurig Internet-device][Peage portal: Printing with Péage on any Internet device] ===
=== [EveryOnePrint: Printen met Péage op een willekeurig Internet-device][EveryOnePrint: Printing with Péage on any Internet device] ===
 
 
[nl]
 
[nl]
Het ISC heeft [http://www.ru.nl/facilitairbedrijf/printen/printen-vanaf-smartphone-tablet-etc-everyoneprint/ EveryOnePrint/eop] beschikbaar gemaakt. Hiermee kan vanaf smartphone, tablet of elk ander Internet-device dat verbonden is met het universiteitsnetwerk geprint worden naar [https://wiki.science.ru.nl/cncz/Peage Peage], via web-upload, app of mail. De directe link naar EOP is https://eop.ru.nl. Jammer genoeg is ervoor gekozen om de mail-optie alleen met een @ru.nl mail-adres te laten werken, niet met een @science.ru.nl of ander mail-adres.
+
Met de [https://peage.ru.nl Peage portal] kan vanaf smartphone, tablet of elk ander Internet-device dat verbonden is met het universiteitsnetwerk geprint worden naar [https://wiki.science.ru.nl/cncz/Peage Peage], via bv web-upload.  
 
[/nl]
 
[/nl]
 
[en]
 
[en]
The ISC made [http://www.ru.nl/fb/english/print/printing-from-smartphone-tablet-etc-everyoneprint/ EveryOnePrint] available. With this, you can print from smartphone, tablet and every Internet-device connected to the university network to [https://wiki.science.ru.nl/cncz/Peage Peage], through web upload, app or mail. The direct link to EOP is https://eop.ru.nl. Unluckily enough, the mail option was chosen to work only with @ru.nl mail addresses, not with @science.ru.nl or other addresses.
+
With the [https://peage.ru.nl Peage portal] you can print from smartphone, tablet and every Internet-device connected to the university network to [https://wiki.science.ru.nl/cncz/Peage Peage], through e.g. web upload.
 
[/en]
 
[/en]
  
Line 194: Line 122:
 
:  De Windows kluis wordt gestart. Klik op <strong>Add a Windows credential</strong> rechts naast de rubriek <strong>Windows Credentials</strong>.
 
:  De Windows kluis wordt gestart. Klik op <strong>Add a Windows credential</strong> rechts naast de rubriek <strong>Windows Credentials</strong>.
 
:  Voer credential gegevens in:
 
:  Voer credential gegevens in:
:  Internet or network address: <strong>payprint03.ru.nl</strong> (medewerkers) of <strong>payprint01.ru.nl</strong> studenten
+
:  Internet or network address: <strong>print.hosting.ru.nl</strong>
 
:  User name: je RU-account, voorafgegaan door <strong>ru\</strong>, bv. <strong>ru\u123456</strong> (medewerkers) of <strong>ru\s123456</strong> (studenten)
 
:  User name: je RU-account, voorafgegaan door <strong>ru\</strong>, bv. <strong>ru\u123456</strong> (medewerkers) of <strong>ru\s123456</strong> (studenten)
 
:  Password: je bijbehorend RU-password (niet de Peage PIN-code)
 
:  Password: je bijbehorend RU-password (niet de Peage PIN-code)
Line 207: Line 135:
 
:  Als de printer wordt opgesomd in de <strong>Select a printer</strong> lijst, dubbelklik op de printer. De printer wordt automatisch geinstalleerd en toegevoegd aan uw printers.
 
:  Als de printer wordt opgesomd in de <strong>Select a printer</strong> lijst, dubbelklik op de printer. De printer wordt automatisch geinstalleerd en toegevoegd aan uw printers.
  
:  In het andere geval, klik op <strong>The printer that I want isn't listed</strong> en selecteer <strong>Select a shared printer by name</strong>, voer vervolgens in <b>\\payprint03.ru.nl\RU-Print03</b> of <b>\\payprint01.ru.nl\RU-Print</b> (studenten).
+
:  In het andere geval, klik op <strong>The printer that I want isn't listed</strong> en selecteer <strong>Select a shared printer by name</strong>, voer vervolgens in <b>\\print.hosting.ru.nl\FollowMe</b>.
 
:  De printer wordt nu automatisch geïnstalleerd en toegevoegd aan uw printers.
 
:  De printer wordt nu automatisch geïnstalleerd en toegevoegd aan uw printers.
  
Line 232: Line 160:
 
:  The Windows Vault appears. Click on <strong>Add a Windows credential</strong> next to the header <strong>Windows Credentials</strong>.
 
:  The Windows Vault appears. Click on <strong>Add a Windows credential</strong> next to the header <strong>Windows Credentials</strong>.
 
:  Enter credential data:
 
:  Enter credential data:
:  Internet or network address: <strong>payprint03.ru.nl</strong> (staff) or <strong>payprint01.ru.nl</strong> (students)
+
:  Internet or network address: <strong>print.hosting.ru.nl</strong>
 
:  User name: <strong>ru\</strong> followed by your RU-account, eg. <strong>ru\u123456</strong> (staff) or <strong>ru\s123456</strong> (students)
 
:  User name: <strong>ru\</strong> followed by your RU-account, eg. <strong>ru\u123456</strong> (staff) or <strong>ru\s123456</strong> (students)
 
:  Password: your matching RU-password (not your Peage PIN code)
 
:  Password: your matching RU-password (not your Peage PIN code)
Line 245: Line 173:
 
:  If the printer is listed in the <strong>Select a printer</strong> list, double click on the printer. The printer will automatically be installed and added to your printers.
 
:  If the printer is listed in the <strong>Select a printer</strong> list, double click on the printer. The printer will automatically be installed and added to your printers.
  
:  Otherwise, click on <strong>The printer that I want isn't listed</strong> and select <strong>Select a shared printer by name</strong>, next enter <b>\\payprint03.ru.nl\RU-Print03</b> (staff) or <b>\\payprint01.ru.nl\RU-Print</b> (students)
+
:  Otherwise, click on <strong>The printer that I want isn't listed</strong> and select <strong>Select a shared printer by name</strong>, next enter <b>\\print.hosting.ru.nl\FollowMe</b>
 
:  The printer will now be automatically installed and added to your printers.
 
:  The printer will now be automatically installed and added to your printers.
  
Line 291: Line 219:
 
:  Type: <strong>Windows printer via spoolss</strong>
 
:  Type: <strong>Windows printer via spoolss</strong>
 
:  Device: <strong>Another Device</strong>
 
:  Device: <strong>Another Device</strong>
:  URL: <strong>smb://payprint03.ru.nl/RU-print03</strong> (medewerkers) or strong>smb://payprint01.ru.nl/RU-print</strong> (studenten)
+
:  URL: <strong>smb://print.hosting.ru.nl/FollowMe</strong>
:  Name: Naar wens invullen, bv. <strong>RU-print03</strong> (onder deze naam verschijnt de printer in je lijst)
+
:  Name: Naar wens invullen, bv. <strong>Peage</strong>
 
:  Location: Vrij in te vullen <strong>Péage Konica Minolta printers</strong>
 
:  Location: Vrij in te vullen <strong>Péage Konica Minolta printers</strong>
:  Use: Choose a Driver... select <strong>Generic Postscript Printer</strong>. Opmerking: als je wilt dat de printer ook nietjes in je prints niet, dan moet je een printer specifieke driver voor jou specifieke printer installeren. Konica minolta heeft helaas geen generieke printer driver voor al zijn printers voor MacOS. Voor windows hebben ze die wel, en daar werkt nieten ook standaard. Dus als je het slechts een enkele keer nodig hebt, kun je ook aan een collega met een windows machine vragen of hij het voor je wil printen met nietjes. Een specifieke driver voor een specifieke printer voor MacOS kun downloaden op de Konica Minolta website. Je moet dan ook in de printer configuratie nog extra hardware addon modules configuren. Namelijk een "paper source unit", "finisher" en "punch unit". Welke specifieke hardware modules jou printer heeft kun je het beste opzoeken in de printer configuratie van een collega die Windows als besturingssysteem heeft.  
+
:  Use: Choose a Driver... select <strong>Generic Postscript Printer</strong>. Opmerking: als je wilt dat de printer ook nietjes in je prints niet, dan moet je een printerspecifieke driver voor jouw specifieke printer installeren. Konica Minolta heeft helaas geen generieke printer driver voor al zijn printers voor MacOS. Voor MS-Windows hebben ze die wel, en daar werkt nieten ook standaard. Dus als je het slechts een enkele keer nodig hebt, kun je ook aan een collega met een MS-Windows machine vragen of hij het voor je wil printen met nietjes. Een specifieke driver voor een specifieke printer voor MacOS kun je downloaden op de Konica Minolta website. Je moet dan ook in de printerconfiguratie nog extra hardware addon modules configuren. Namelijk een "paper source unit", "finisher" en "punch unit". Welke specifieke hardware modules jouw printer heeft kun je het beste opzoeken in de printer configuratie van een collega die Windows als besturingssysteem heeft.  
 
:  Klik daarna op <strong>Add</strong>.
 
:  Klik daarna op <strong>Add</strong>.
  
Line 343: Line 271:
 
:  Type: <strong>Windows printer via spoolss</strong>
 
:  Type: <strong>Windows printer via spoolss</strong>
 
:  Device: <strong>Another Device</strong>
 
:  Device: <strong>Another Device</strong>
:  URL: <strong>smb://payprint03.ru.nl/RU-print03</strong> (staff) or <strong>smb://payprint01.ru.nl/RU-print</strong> (students)
+
:  URL: <strong>smb://print.hosting.ru.nl/FollowMe</strong>
:  Name: Free to type text field, eg. <strong>RU-print03</strong> (this will become the name of the printer in the printer list)
+
:  Name: Free to type text field, eg. <strong>Peage</strong> (this will be the name of the printer in the printer list)
 
:  Location: Free to type text field, eg. <strong>Péage Konica Minolta printers</strong>
 
:  Location: Free to type text field, eg. <strong>Péage Konica Minolta printers</strong>
:  Use: Change <strong>Choose a Driver...</strong> to the printer driver, eg. <strong>Generic Postscript Printer</strong>. Remark: if you want to staple your prints, then you need for printing on MacOS to install a specific driver for your specific printer. Unfortunately Konica Minolta doesn't has a generic driver for all its printers for MacOS as it has for Windows. If you need stapling only in special occasions then you could ask a colleague with a Windows computer to print it for you with staples.  A specific driver for your specific printer can be downloaded from the Konica Minolta website. You also have to configure the specific hardware addons to your specific printer. You can do this in the "printer& scanner" preferences, then select your specific printer left, and then on the right side click "options supply" button, and go to the Options tab. In this tab set the specific "paper source unit", "finisher" and "punch unit". Ask a colleague with a Windows computer to look in its printer configuration to find out which specific "paper source unit", "finisher" and "punch unit" your printer has.  
+
:  Use: Change <strong>Choose a Driver...</strong> to the printer driver, eg. <strong>Generic Postscript Printer</strong>. Remark: if you want to staple your prints, then you need for printing on MacOS to install a specific driver for your specific printer. Unfortunately Konica Minolta doesn't provide a generic driver for all its printers for MacOS as it does for Windows. If you need stapling only in special occasions then you could ask a colleague with a Windows computer to print it for you stapled.  A specific driver for your specific printer can be downloaded from the Konica Minolta website. You also have to configure the specific hardware addons to your specific printer. You can do this in the "printer&scanner" preferences, then select your specific printer left, and then on the right side click the "options supply" button, and go to the Options tab. In this tab set the specific "paper source unit", "finisher" and "punch unit". Ask a colleague with a Windows computer to look in its printer configuration to find out which specific "paper source unit", "finisher" and "punch unit" your printer has.  
 
:  Finally click <strong>Add</strong>.
 
:  Finally click <strong>Add</strong>.
  
:  A new window will appear with an option <strong>Duplex Printing Unit</strong>. Mark the check box as active and click <strong>OK</strong>.
+
:  A new window will appear with an option <strong>Duplex Printing Unit</strong>. Mark the checkbox as active and click <strong>OK</strong>.
  
 
; Step 4
 
; Step 4
Line 411: Line 339:
 
: Er verschijnt een Window <strong>New Printer</strong>, selecteer hier <strong>Network Printer</strong> en vervolgens <strong>Windows Printer via SAMBA</strong>.
 
: Er verschijnt een Window <strong>New Printer</strong>, selecteer hier <strong>Network Printer</strong> en vervolgens <strong>Windows Printer via SAMBA</strong>.
 
: Aan de rechterkant kun je nu gegevens invullen:
 
: Aan de rechterkant kun je nu gegevens invullen:
: SMB Printer: <strong>smb://payprint03.ru.nl/RU-Print03</strong> ''(kies de juiste server, zie [[#.5BOnderscheid_gebruikers.5D.5BUser_groups.5D|Onderscheid gebruikers]])''
+
: SMB Printer: <strong>smb://print.hosting.ru.nl/FollowMe</strong>
 
: Authentication: <strong>Prompt user if authentication is required</strong>. Als deze optie niet aanwezig is, dan herstart de installatie met de system-config-printer utility welke deze wel heeft.  
 
: Authentication: <strong>Prompt user if authentication is required</strong>. Als deze optie niet aanwezig is, dan herstart de installatie met de system-config-printer utility welke deze wel heeft.  
 
<!--  [[Bestand:Linux_new_smb_printer.png---]] -->
 
<!--  [[Bestand:Linux_new_smb_printer.png---]] -->
Line 435: Line 363:
 
; Stap 6
 
; Stap 6
 
: De printer is ge&iuml;nstalleerd en klaar voor gebruik.
 
: De printer is ge&iuml;nstalleerd en klaar voor gebruik.
: Het beste is om eerst met firefox een test print te maken om de credentials te initialiseren en op te slaan in de gnome keyring. Gebruik firefox want niet alle linux programma's doen authentificatie correct, maar nadat je credentials correct zijn opgeslagen in de gnome-keyring printen zal met alle linux applicaties goed werken.
+
: Het beste is om eerst met Firefox een test print te maken om de credentials te initialiseren en op te slaan in de gnome keyring. Gebruik Firefox, want niet alle Linux programma's doen authentificatie correct, maar nadat je credentials correct zijn opgeslagen in de gnome-keyring, zal printen met alle Linux-applicaties goed werken.
 
: Dus als je de eerste keer gebruik maakt van de printer zal er een bericht <strong>Authentication is required to print ...</strong> worden getoond waarin tevens naar je credentials wordt gevraagd. Het kan zijn dat je printjob wordt gepauzeerd tbv authenticatie. In dat geval open de print queue en klik met de rechter muis knop op de printjob. In het context menu dat verschijnt selecteer de authenticate option. Het is een goed idee op de print queue applet geopend te houden en te controleren op printjobs die geauthenticeerd dienen te worden.
 
: Dus als je de eerste keer gebruik maakt van de printer zal er een bericht <strong>Authentication is required to print ...</strong> worden getoond waarin tevens naar je credentials wordt gevraagd. Het kan zijn dat je printjob wordt gepauzeerd tbv authenticatie. In dat geval open de print queue en klik met de rechter muis knop op de printjob. In het context menu dat verschijnt selecteer de authenticate option. Het is een goed idee op de print queue applet geopend te houden en te controleren op printjobs die geauthenticeerd dienen te worden.
 
: Voer bij <strong>Username</strong> in: eerst de domain prefix <strong>ru\</strong> direct gevolgd door je u/s/e/f-nummer, bv <strong>ru\u123456</strong>, en bij <strong>Password</strong> je RU-wachtwoord (niet je Peage PIN-code).
 
: Voer bij <strong>Username</strong> in: eerst de domain prefix <strong>ru\</strong> direct gevolgd door je u/s/e/f-nummer, bv <strong>ru\u123456</strong>, en bij <strong>Password</strong> je RU-wachtwoord (niet je Peage PIN-code).
Line 471: Line 399:
 
: A window <strong>New Printer</strong> emerges, select <strong>Network Printer</strong> and then <strong>Windows Printer via SAMBA</strong>.
 
: A window <strong>New Printer</strong> emerges, select <strong>Network Printer</strong> and then <strong>Windows Printer via SAMBA</strong>.
 
: On the right side you can provide required data:
 
: On the right side you can provide required data:
: SMB Printer: <strong>smb://payprint03.ru.nl/RU-Print03</strong> ''(check your [[#.5BOnderscheid_gebruikers.5D.5BUser_groups.5D|User group]] for the correct server)''
+
: SMB Printer: <strong>smb://print.hosting.ru.nl/FollowMe</strong>
 
: Authentication: <strong>Prompt user if authentication is required</strong>.  If this option is not available then restart the installation with the system-config-printer tool instead which has this option!
 
: Authentication: <strong>Prompt user if authentication is required</strong>.  If this option is not available then restart the installation with the system-config-printer tool instead which has this option!
 
<!--  [[File:Linux_new_smb_printer.png---]] -->
 
<!--  [[File:Linux_new_smb_printer.png---]] -->
Line 484: Line 412:
 
; Step 5
 
; Step 5
 
: Provide the requested data:
 
: Provide the requested data:
: Printer Name: RU-Print03 ''(use the name of the print queue, see [[#.5BOnderscheid_gebruikers.5D.5BUser_groups.5D|User group]])''
+
: Printer Name: Peage ''(use the name of the print queue, see [[#.5BOnderscheid_gebruikers.5D.5BUser_groups.5D|User group]])''
 
: Description: KONICA MINOLTA C754SeriesPS/P
 
: Description: KONICA MINOLTA C754SeriesPS/P
 
: Location: Virtual printqueue / available at all Peage KM printers
 
: Location: Virtual printqueue / available at all Peage KM printers
Line 516: Line 444:
 
Assuming your U-number is u123456 and you want to print the file "something.pdf":
 
Assuming your U-number is u123456 and you want to print the file "something.pdf":
 
; Step 1
 
; Step 1
:  smbclient -U "ru\u123456" //payprint03.ru.nl/RU-Print03 -c "print something.pdf"
+
:  smbclient -U "ru\u123456" //print.hosting.ru.nl/FollowMe -c "print something.pdf"
 
:  Enter RU-password at the prompt and go to a printer to follow the usual procedure.
 
:  Enter RU-password at the prompt and go to a printer to follow the usual procedure.
  
Line 525: Line 453:
  
 
; Step 2
 
; Step 2
:  Enter connection: smb://_USER:_PASSWORD@payprint03.ru.nl/RU-Print03, "Continue"
+
:  Enter connection: smb://_USER:_PASSWORD@print.hosting.ru.nl/FollowMe, "Continue"
 
:  We could enter the actual _USER and _PASSWORD, but is more secure to keep the strings "_USER" and "_PASSWORD", and set them later (see below).
 
:  We could enter the actual _USER and _PASSWORD, but is more secure to keep the strings "_USER" and "_PASSWORD", and set them later (see below).
  
 
; Step 3
 
; Step 3
:  Provide a PPD File: [Browse], upload the ppd file [https://wiki.science.ru.nl/cncz/images/f/fd/Peage.ppd Peage.ppd], and click "Add Printer". After this, "lpq -P RU-Print03" should show "RU-Print03 is ready".
+
:  Provide a PPD File: [Browse], upload the ppd file [https://wiki.science.ru.nl/cncz/images/f/fd/Peage.ppd Peage.ppd], and click "Add Printer". After this, "lpq -P FollowMe" should show "FollowMe is ready".
  
 
; Step 4
 
; Step 4
Line 536: Line 464:
 
:
 
:
 
:  AuthInfoRequired username,password
 
:  AuthInfoRequired username,password
:  DeviceURI smb://_USER:_PASSWORD@payprint03.ru.nl/RU-Print03
+
:  DeviceURI smb://_USER:_PASSWORD@print.hosting.ru.nl/FollowMe
 
:
 
:
 
:  The actual _USER and _PASSWORD can be set, and the AuthInfoRequired can be set:
 
:  The actual _USER and _PASSWORD can be set, and the AuthInfoRequired can be set:
Line 542: Line 470:
 
:  AuthInfoRequired none
 
:  AuthInfoRequired none
 
:
 
:
:  After restarting cups ("service cups restart") printing should work. To make this the default add "export PRINTER=RU-RUPrint03" to ~/.bashrc and print with lpr, or using, e.g., okular or evince. The default setting is to print in grayscale. If you want to print in color, change the settings. With lpr, use <tt>-o SelectColor=Color</tt>. To set this option permanently use: <tt>"/usr/bin/lpoptions -o SelectColor=Color"</tt>. This will store the setting in <tt>/etc/cups/lpoptions</tt>.
+
:  After restarting cups ("service cups restart") printing should work. To make this the default add "export PRINTER=FollowMe" to ~/.bashrc and print with lpr, or using, e.g., okular or evince. The default setting is to print in grayscale. If you want to print in color, change the settings. With lpr, use <tt>-o SelectColor=Color</tt>. To set this option permanently use: <tt>"/usr/bin/lpoptions -o SelectColor=Color"</tt>. This will store the setting in <tt>/etc/cups/lpoptions</tt>.
  
 
; Step 5
 
; Step 5
Line 548: Line 476:
 
:  #!/bin/bash
 
:  #!/bin/bash
 
:  export AuthInfoRequired none
 
:  export AuthInfoRequired none
:  export DEVICE_URI="smb://_USER:_PASSWORD@payprint03.ru.nl/RU-Print03"
+
:  export DEVICE_URI="smb://_USER:_PASSWORD@print.hosting.ru.nl/FollowMe"
 
:  /usr/bin/smbspool "$@"
 
:  /usr/bin/smbspool "$@"
 
:
 
:
Line 570: Line 498:
 
[en]
 
[en]
 
; Step 1
 
; Step 1
:  Log in with your RU-account, now without the <strong>ru\</strong> prefix, eg. <strong>u123456</strong> and Péage PIN or RU-password on one of the Konica Minolta MFP's. At MFPs with a card reader, you can also first enter your Péage PIN and then swipe your campus card. For employees with multiple contracts this swiping can possibly be a problem.
+
:  Log in with your RU-account, now without the <strong>ru\</strong> prefix, eg. <strong>u123456</strong> and Péage PIN or RU-password on one of the Konica Minolta MFP's. At MFPs with a card reader, you can also just swipe your campus card. For employees with multiple contracts this swiping can possibly be a problem.
 
; Step 2
 
; Step 2
 
:  Choose <strong>Print</strong>, select the print job(s).
 
:  Choose <strong>Print</strong>, select the print job(s).
Line 613: Line 541:
 
== [Stand en geschiedenis budget][Status and history budget] ==
 
== [Stand en geschiedenis budget][Status and history budget] ==
 
[nl]
 
[nl]
Door in te loggen op de [http://eqcas.ru.nl:2941/webtools accounting server website] met dezelfde login/wachtwoord als boven, kan men het budget zien (Current balance). De [https://eqcas.ru.nl:2941/webtools/statement.html geschiedenis van het budget] valt te bekijken door op 'Statement' te klikken, dan krijgt men iets te zien als:
+
Door in te loggen op de [http://peage.ru.nl Peage portal] met dezelfde login/wachtwoord als boven, kan men het budget zien (Current balance).
[/nl]
 
[en]
 
By logging in at the [http://eqcas.ru.nl:2941/webtools accounting server website] with the user credentials as above, one can view the current balance of the budget. The [https://eqcas.ru.nl:2941/webtools/statement.html budget history] can be seen after clicking on 'Statement', one then gets something like this:
 
[/en]
 
<pre>
 
7-10-2010     
 
User account statement
 
Reporting period 8-9-2010 to 7-10-2010
 
 
 
s0123456        Test Student
 
Opening Balance:  0,00
 
Color quota    unlimited
 
Date                Type      User ID      Description                Pages  Credit    Debit
 
---------------------------------------------------------------------------------------------
 
24-9-2010 11:13    adj                    test account                        10,00    0,00
 
6-10-2010 17:47    print    s0123456    Microsoft Word - Document1    3    0,00    0,10
 
6-10-2010 17:48    print    s0123456    Microsoft Word - Verslag      10    0,00    0,40
 
7-10-2010 10:14    print    s0123456    Microsoft Word - Opgave2      3    0,00    0,10
 
7-10-2010 15:18    copy      s0123456    Copying                    1  0,00  0,04
 
----------------------------------------------------------------------------------------------
 
                                                                        17    10,00    0,64
 
Closing Balance:    9,36
 
</pre>
 
 
 
 
 
 
 
== [Geschiedenis van Project Péage][History of Project Péage] ==
 
[nl]
 
Alle publieke Konica Minolta printers binnen de FNWI-gebouwen zijn per 2016-08-23 gemigreerd naar Péage.
 
 
 
Het C&amp;CZ printbudget systeem wordt nog gebruikt als betalingssysteem voor de [https://wiki.science.ru.nl/cncz/Kamerbreed posterprinter kamerbreed] en de [https://wiki.science.ru.nl/cncz/Printers_en_printen#.5BC.26CZ_3D-printers.5D.5BC.26CZ_3D_printers.5D 3D-printers]. Alle andere afdelingsprinters maken geen gebruik meer van het C&amp;CZ budgetsysteem en zijn overgestapt naar het <strong>Cups</strong> printsysteem.
 
 
 
De printbudgetten van ingeschreven studenten zijn per 2016-08-24 overgeheveld naar Péage.
 
 
[/nl]
 
[/nl]
 
[en]
 
[en]
As of 2016-08-23 all publicly available Konica Minolta printers within the FNWI buildings have been migrated to Péage. The C&amp;CZ printbudget system will remain in use as cashing system for the [https://wiki.science.ru.nl/cncz/Kamerbreed poster printer kamerbreed] and the [https://wiki.science.ru.nl/cncz/Printers_en_printen#.5BC.26CZ_3D-printers.5D.5BC.26CZ_3D_printers.5D 3D-printers]. All other departmental printers stopped using the C&amp;CZ printbudget system and have switched to the <strong>Cups</strong> printing system.
+
By logging in at the [http://peage.ru.nl Peage portal] with the user credentials as above, one can view the current balance of the budget.
 
 
The printing budgets of registered students have been transfered to Péage per 2016-08-24.
 
 
[/en]
 
[/en]
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]
 
[[Category:Software]]
 
[[Category:Software]]

Revision as of 16:52, 13 March 2019

Péage

General

Péage is the print/scan/copy system of Radboud University for staff and students. As of March 2019, the old Konica Minolta MFPs and the corresponding software are replaced. The Library of Science has passes for guests. General information can be found on the Péage website.

The C&CZ printbudget system is only used for a few printers (poster and 3D).

On this page, C&CZ provides information specific for staff and students of FNWI.

Terminology

  • MFP: multifunctional printer (that can print, copy and scan)


Known problems

  • An E-number user can't print. RBS-management can solve that:
   Nummer      Kamer Naam                                     Afdeling                              Email 
    52246   HG02.047 Ir. J.J. Zijlstra, (Jan-Jetze)           Facbureau NW        
  • Remote Downlevel Document: When printing from Linux, the MFP shows "Remote Downlevel Document" instead of the name of the printed file.
  • Evince print in A3 format. Remove the file ~/.config/evince/print-settings.
  • lpq problem. Update default printer. Edit the file ~/.lpoptions [of|or] ~/.cups/lpoptions.
  • In the Linux Document Viewer you need to print twice to get one output.
  • Please remove printers that are no longer part of the print system from your computer.
  • cups-2.2.7 and smbclient-4.8.1 conflict in their command-line API which breaks printing on Linux (seen on Arch Linux). A solution is to patch /usr/lib/cups/backend/smb (or to update smbclient).

Printing with Péage

User groups

Péage has 1 printserver and 1 printqueue for FollowMe printing:

printserver printqueue UNC - Windows style URI - IPP style
print.hosting.ru.nl FollowMe \\print.hosting.ru.nl\FollowMe smb://print.hosting.ru.nl/FolowMe

For smaller printers without display/keyboard, the direct printqueue of the printer must be used:

printserver printqueue UNC - Windows style URI - IPP style
print.hosting.ru.nl KMxxxx \\print.hosting.ru.nl\KMxxxx smb://print.hosting.ru.nl/KMxxxx

Peage portal: Printing with Péage on any Internet device

With the Peage portal you can print from smartphone, tablet and every Internet-device connected to the university network to Peage, through e.g. web upload.

Printing with Péage on a Windows 7/8/8.1/10 machine (either self or CnCZ managed)

The instructions below are valid if you logged in with your Science account. If you logged in with RU\U-number or RU\s-number, go directly to step 4. N.B.: your settings are not saved then, since there is no roaming profile. To attach the printer, you need your RU-account (u/f/e/s-number and RU-password, not the Peage PIN code).

Important: Choose the correct server and queue, see User groups.

Step 0
For a C&CZ managed PC: make sure your roaming profile is not out of space, because otherwise the changes to your settings will not be saved.
Step 1
Select Start, in the Help / Search area enter Credential Manager and launch the application found.
Step 2
The Windows Vault appears. Click on Add a Windows credential next to the header Windows Credentials.
Enter credential data:
Internet or network address: print.hosting.ru.nl
User name: ru\ followed by your RU-account, eg. ru\u123456 (staff) or ru\s123456 (students)
Password: your matching RU-password (not your Peage PIN code)
Finally click OK and close the Credential Manager.
Step 3
Select Start, in the Help / Search area enter Devices and Printers and launch the Control menu item.
Step 4
In the Menu bar click on Add a Printer, select Add a network, wireless or Bluethooth printer.
If the printer is listed in the Select a printer list, double click on the printer. The printer will automatically be installed and added to your printers.
Otherwise, click on The printer that I want isn't listed and select Select a shared printer by name, next enter \\print.hosting.ru.nl\FollowMe
The printer will now be automatically installed and added to your printers.
Click Next and finally Finish.
Step 5
Continue with Printing a job at the MFP


Printing with Péage on a Mac OS X machine

The ISC has made an installation tool available to add Péage printers: See Mac OS X instructions.


Manual installation

You need your RU-account (u/f/e/s-number and RU-password, not your Peage PIN code) to send a print job to the printer.
Important: Choose the correct server and queue, see User groups.

Step 1
Select System Preferences, select Printers & Scanners
Step 2
Click on the + (plus) sign below the list of printers.
See if you have an item Advanced in the menu bar.
Whenever this item is not present: Right click in this menu bar and choose Customize Toolbar....
Drag the item Advanced into the menu bar.
Click on Done and, again, click on the item Advanced in the menu bar.
Step 3
Enter printer data:
Type: Windows printer via spoolss
Device: Another Device
URL: smb://print.hosting.ru.nl/FollowMe
Name: Free to type text field, eg. Peage (this will be the name of the printer in the printer list)
Location: Free to type text field, eg. Péage Konica Minolta printers
Use: Change Choose a Driver... to the printer driver, eg. Generic Postscript Printer. Remark: if you want to staple your prints, then you need for printing on MacOS to install a specific driver for your specific printer. Unfortunately Konica Minolta doesn't provide a generic driver for all its printers for MacOS as it does for Windows. If you need stapling only in special occasions then you could ask a colleague with a Windows computer to print it for you stapled. A specific driver for your specific printer can be downloaded from the Konica Minolta website. You also have to configure the specific hardware addons to your specific printer. You can do this in the "printer&scanner" preferences, then select your specific printer left, and then on the right side click the "options supply" button, and go to the Options tab. In this tab set the specific "paper source unit", "finisher" and "punch unit". Ask a colleague with a Windows computer to look in its printer configuration to find out which specific "paper source unit", "finisher" and "punch unit" your printer has.
Finally click Add.
A new window will appear with an option Duplex Printing Unit. Mark the checkbox as active and click OK.
Step 4
Now is the time to setup your printing preferences. Click Options & Supplies... and next Options.
Our advice: select black-and-white printing and Duplex Printing Unit as your printing defaults.
Step 5
The setup to use your RU-account and RU-password (not your Peage PIN code) is explained next.
Find some document you wish to print and send your first print job to this new Péage printer.
If your printer is shown in the Dock you will notice a 1 on top of the printer icon.
Click on the printer icon to view the print queue.
You could also click on the printer in Printers & Scanners in System Preferences.
The status will be that the print job has been send, but after a while the status will change to Hold for Authentication.
Select the print job in the print queue and click on the button Resume.
A dialog window appears requesting your Name and Password.
Enter ru\, followed by your RU-account, eg. ru\u123456, and the matching RU-password (not your Peage PIN code).
If the printer icon is missing from the Dock, the dialog window requesting <stron>Name and Password will popup.
Login with your RU-account (ru\u123456) and RU-password (not your Peage PIN code).
Select if desired Remember this password in my keychain, so your RU-account and RU-password will be remembered, authentication for print jobs is no more needed.
Clicking OK will, after a second (depending on the size of your print job), remove the print job from the queue. The job is then received by the print server and remains
in its print queue for final printing.
Step 6
Continue with Printing a job at the MFP


Printing with Péage on a C&CZ managed Linux machine

The printer "Peage" is listed. Command line printing with lpr -PPeage is possible. To let this work, your U- or s-number must be registered at C&CZ. You can check this on the Do-It-Yourself site.

Printing with Péage on a self managed Linux machine

You need your RU-account (u/f/e/s-number and RU-password, not your Peage PIN code) to send a print job to the printer.
Important: Choose the correct server and queue, see User groups.

Below a short description how to install the printer on Ubuntu 14.04 (Trusty Tahr). This procedure might work for other recent Linux systems using the Gnome Desktop. It may be necessary to first install the smbclient package using your package manager.

Step 1
If you are using a C&CZ managed Linux computer, the printer is already installed. Go to step 6.
Via System Settings visit Printers. Or start the tool system-config-printer tool from the commandline with the command: system-config-printer
Step 2
Click above the field with printers on the Add button.
There might appear a window Authenticate, provide the requested root password.
Step 3
A window New Printer emerges, select Network Printer and then Windows Printer via SAMBA.
On the right side you can provide required data:
SMB Printer: smb://print.hosting.ru.nl/FollowMe
Authentication: Prompt user if authentication is required. If this option is not available then restart the installation with the system-config-printer tool instead which has this option!
Click on Forward.
Step 4
In the next window you have to choose a driver: Select Provide PPD file.
Also select the Peage.ppd (Postscript Printer Description) file, which has to be downloaded first via right-clicking the link.
Click on Forward. You should see a window Installable Options with settings you can change. If using the correct PPD file no adaptations are needed.
Click on Forward.
Step 5
Provide the requested data:
Printer Name: Peage (use the name of the print queue, see User group)
Description: KONICA MINOLTA C754SeriesPS/P
Location: Virtual printqueue / available at all Peage KM printers
Click on Apply.
There might appear a window Authenticate
At Username type: first the domain prefix ru\, directly followed by your u/s/e/f-number, e.g. ru\u123456, and at Password your RU-password (not your Peage PIN code).
Select Cancel at the question Would you like to print a test page?.
Step 6
Your printer has been installed and is ready to use.
It is adviced to first use firefox to make a test print to initialize and store your credentials safely in the gnome keyring. Use firefox because not all linux programs ask for authentication correctly, but will print alright once the credentials are stored correcty in the keyring.
As soon as you use the printer, a window will pop up showing the message Authentication is required to print ... and also asking for your credentials. It can happen that your print job gets paused requesting authentication. In that case open the print queue and right click on your print job. In the upcoming context menu select the authenticate option. It might be a good idea to keep the print queue applet open and to check for print jobs requesting authentication.
At Username type first: the domain prefix ru\, directly followed by your u/s/e/f-number, e.g. ru\u123456, and at Password your RU-password (not your Peage PIN code).
Credentials are stored in the gnome-keyring which can be viewed or modified with the tool seahorse. Before using seahorse you probably need to install it first with your package manager.
Step 7
Continue with Printing a job at the MFP
Fix for wrong credentials in keyring
Delete your current keyrings folder in ~/.local/share/keyrings or ~/.gnome2/keyrings
Logout, and immediately login again. Check that a new keyrings folder has been created.
Start Firefox and print a page.
Now you should get an authentication dialog with a checkbox "Remember password". Enter your ru credentials and check the checkbox to store your credentials in the gnome keyring.
From now on you should be able to print without needing to enter your credentials, because they will taken from your keyring which is made accessible when you logged in with your machine's password.

Printing with Péage using smbclient

Assuming your U-number is u123456 and you want to print the file "something.pdf":

Step 1
smbclient -U "ru\u123456" //print.hosting.ru.nl/FollowMe -c "print something.pdf"
Enter RU-password at the prompt and go to a printer to follow the usual procedure.

Printing with Péage using CUPS (on Linux)

If printing using the smbclient command works, a regular print queue can be set up with CUPS. Usually this requires root access.

Step 1
With a browser open: https://localhost:631 and select "Adding Printers and Classes", "Add Printer" [Username: root, Password: <rootpassword>", Other Network Printers: "Windows Printer via SAMBA", "Continue".
Step 2
Enter connection: smb://_USER:/FollowMe, "Continue"
We could enter the actual _USER and _PASSWORD, but is more secure to keep the strings "_USER" and "_PASSWORD", and set them later (see below).
Step 3
Provide a PPD File: [Browse], upload the ppd file Peage.ppd, and click "Add Printer". After this, "lpq -P FollowMe" should show "FollowMe is ready".
Step 4
CUPS will store the information from step 3 into /etc/cups/printers.conf
There should be details of the printer, and also these lines:
AuthInfoRequired username,password
DeviceURI smb://_USER:/FollowMe
The actual _USER and _PASSWORD can be set, and the AuthInfoRequired can be set:
AuthInfoRequired none
After restarting cups ("service cups restart") printing should work. To make this the default add "export PRINTER=FollowMe" to ~/.bashrc and print with lpr, or using, e.g., okular or evince. The default setting is to print in grayscale. If you want to print in color, change the settings. With lpr, use -o SelectColor=Color. To set this option permanently use: "/usr/bin/lpoptions -o SelectColor=Color". This will store the setting in /etc/cups/lpoptions.
Step 5
After a reboot, AuthInfoRequired in /etc/cups/printers.conf may be reset to "username,password". Also, you may not like a password in plain ASCII. This can be fixed by changing the backend: the "smb" in printer.conf refers to /usr/lib/cups/backend/smb, which usually is a link to /usr/bin/smbspool. Change /usr/lib/cups/backend/smb into a bash script:
#!/bin/bash
export AuthInfoRequired none
export DEVICE_URI="smb://_USER:/FollowMe"
/usr/bin/smbspool "$@"
You can now use the actual RU-username and password, or create a script that has a more secure way of obtaining the password

Printing a job at the MFP

Step 1
Log in with your RU-account, now without the ru\ prefix, eg. u123456 and Péage PIN or RU-password on one of the Konica Minolta MFP's. At MFPs with a card reader, you can also just swipe your campus card. For employees with multiple contracts this swiping can possibly be a problem.
Step 2
Choose Print, select the print job(s).
Pressing Details next to the print job will show you the costs of this print job.
Step 3
Press the blue button to print your document(s).
Step 4
Log out


Change PIN and report usage Péage

Step 1
Visit the site MyPeage. This site is only available on the campus network or using VPN.
Step 2
Log in with your RU-account, again without the ru\ prefix, eg. u123456 and RU-password or Péage PIN to the site.
Signing in using the Péage PIN is also a way to test your PIN number.
Step 3
Select the action you wish to perform: Manage my user PINs or Select account report.
Step 4
Log out


Status and history budget

By logging in at the Peage portal with the user credentials as above, one can view the current balance of the budget.