Wireless network Faculty of Science
- ru-wlan, choose one of
- U-number and RU password (for employees)
- S-number and RU password (for students)
- and Science password
- eduroam: choose one of
- and RU password (for employees)
- and RU password (for students)
- and Science password
On Monday, January 28th 2013 at 8:00 pm, one of the servers that is being used by the wireless network of the RU, will be replaced. This replacement will affect you as a user of the wireless networks ru-wlan and eduroam: There will appear a new certificate when connecting. You can just accept this, after which the connection should work. If this appears not to be the case, then it’s best that you remove your old Eduroam- respectively your old RU-WLAN settings first to activate the new connection .
Specifically for iPhone / iPad users:
We recommend that you first remove your old Eduroam- respectively your old RU-WLAN profile before activating the new connection without a profile. If that unexpectedly fails, please review the information on www.ru.nl/wireless for iPhone/iPads.
If necessary, you can also download a new profile from that site.
Within the Science Faculty a secure wireless wi-fi WPA network is available at almost every place in the Huygens building since July 2005. The network advertises itself with the names (SSID's) ""ru-wlan", "eduroam" and/or "Science"". It can be used by people with a U- or S-number and RU-password, but also by everybody with a Science-login.
What you need
To access this "Science"-network, you need:
Wi-Fi hardware that supports WPA (more exactly WPA Enterprise with PEAP/MS-CHAP v2 and/or TTLS). Almost all laptops have this built-in since a few years. All Intel Centrino laptops should be fine. N.B.: There is a security vulnerability in the Intel Centrino Windows-drivers, see Intel support for more information and updates. If one wants to use the Intel PROSet/Wireless software instead of the Windows software, the update above could be necessary.
Laptops from 2003 or later should be fine too, but often you need a driver-update (see the manufacturers web-site). When the built-in hardware doesn't support WPA, one can buy for about EUR 30,- a PCMCIA-card or USB-stick that does. See if needed wi-fi.org for "certified" hardware. C&CZ has tested two low-cost certified PCMCIA-cards, Linksys WPC54G-EU and D-Link DWL-G650+. Older 11 Mbit/s 802.11b and 54 Mbit/s 802.11g hardware as well as newer 600 Mbit/s 802.11n hardware can be used, as long as WPA is supported.
To install the missing certificate, you sometimes need to download this certificate and install it on your device. The certificate can be found at: AddTrustExternalCAroot.CER. In case of problems always verify you have downloaded and installed this certificate, also verify that the wireless connection setup is using this certificate.
- Either Microsoft Windows XP with Service Pack 2 (SP2). See the extensive installation manual.
- Or Microsoft Windows Mobile 5 or 6. We have a simple installation manual available.
- Or Microsoft Windows Vista. Click "Start->Settings->Control Panel->Network". Choose "Setup connection or network". Choose "Setup manually". Choose then "Science" (with 1 capital!), WPA Enterprise and TKIP. Next choose "Change connection settings" and click in the tab "Security" on "Protected EAP" and "Settings...". In the window "Protected EAP properties" one has to check "Validate server certificate" and for "Certificate Authority" check the box: "AddTrustExternalCAroot". Choose the verification method "Protected password (EAP-MSCHAP v2) and withing this in "Configure" uncheck "Automatically use my Windows-logonname and -password (and domain if necessary)". If one doesn't want to make a connection with previously entered account information, one can uncheck "Cache user information for subsequent connections to this network". In the meantime see if necessary the Cable Guy). In the near future, we will provide a detailed installation manual, until then one can use, if needed, the manual as mentioned above. If this is too difficult, don't hesitate to stop by C&CZ with your laptop.
- Or any other operating system with WPA (WPA-Enterprise) support
- For older versions of Windows XP or for Windows 2000, see the Microsoft website, e.g.: Overview of the WPA Wireless Security Update in Windows XP and/or Troubleshooting Windows XP IEEE 802.11 Wireless Access
- For a Palm TX one can buy a WPA-Enterprise upgrade for about 6 US dollar.
- For Linux see this manual.
- For the Eee PC the easiest way is to install the operating system eeeXubuntu, see wiki.eeeuser.com. After installing eeeXubuntu, you can easily access the wireless network by clicking on the wireless-icon in the bottom right of your screen, selecting 'Science' and then entering your username and password.
- For Apple Macintosh WPA-Enterprise support is included with Mac OS X 10.3 or higher: See e.g. Apple's WPA Requirements information. In the Installation- and change manual for Wireless@RU one can find the exact settings.
- The Apple iPhone and iPod Touch have since July, 2008 with the iPhone 2.0 software update support for WPA with 802.1x, so should be able to use the wireless network. There are however problems with RU-wlan.
- For smartphones with Android see this short manual
- For Symbian see this first manual.
- Username and password
Before any Internet-traffic is possible, the combination of a loginname and password is checked through the 802.1x mechanism. One should prevent giving the loginname/password combination to a rogue (not-RU) access-point, by checking the server-certificate. All traffic is encrypted with constantly changing keys, which makes eavesdropping impossible.
- (For the RU-wlan) a RU-password for every RU-employee and student, or the science-loginname, followed by @science.ru.nl, of course in combination with the Science password.
- Or a username/password of an institution that takes part in EduRoam. Remark: Outgoing wireless connections from the Science buildings to institutes that participate in Eduroam will be available from Q2 2012, after the access points in these buildings have been replaced.
- For the "Science" network a C&CZ (science) username and password. Every employee and student of the Faculty of Science has (a right to) that.
RU-wlan for iPhone / iPod / iPad
Instructions for the iPhone, iPod or iPad user and RU-wlan can be found at the UCI ru-wlan site.
Background and future
- At the end of 2004, it was decided that we wanted blanket wireless coverage in Huygens-building phase I. Later it was decided that the RU would supply wireless coverage everywhere on campus.
- After meetings with the UCI, Vosko and Cisco we chose the Cisco 1130AG as wireless access point. After a site survey, 54 of these access points were placed in Huygens-building phase I.
- We had a lot of trouble with the initial configuration, due to our wish to use our existing FreeRadius radius server, which was not supported by our suppliers, our wish to spread the users in different VLANs (subnets) and the wish to make a safe WPA network, for which the users of MS-Windows XP2 SP2 wouldn't have to install extra software and the users wouldn't give their passwords to wrong servers (without correct certificate).
- During 2006 the wireless network was extended to the Huygens building phase II and NanoLab.
- After that, the network has been expanded to HFML, Botanic Greenhouse, WortelLab, ITS and Linnaeus building.
- In the near future, wireless connectivity will be available in (probably) Mercator III (A2-wing after renovation) and several locations outside (lawn, terrace, ....).
- The next generation wireless network will be implemented somewhere in 2011: faster with 802.11n (200+ Mbit/s) and even more secure with WPA2 (better hardware encryption).
- As soon as we switch to VoIP (Voice Over IP, IP-Telephony) for our telephone system, we will look into VoWLAN (Voice over WLAN) as wireless speech solution.